Chamberlain GPS1000 User Manual

1
INTRODUCTION
The Chamberlain Garage Power Station gives you the convenience of power, air, and lighting directly within
your reach. It mounts neatly to your ceiling and reaches anywhere in the garage with a 25 foot utility cord!
The Chamberlain Garage Power Station’s smart design will turn your garage into an efficient work area.
GARAGE POWER STATION
MODEL GPS1000
TOOLS
• Tape measure
• Stud finder
• Pencil or marker
• Drill
• 3/16" Drill bit
• #3 Phillips
screwdriver
• 7/16" socket wrench
• 6" socket extension
(optional)
• Garage Power Station
• Rubber Isolators - large (2), small (2)
• Washers (2)
• ¼" x 2 ½" Lag Screws (2)
SPECIFICATIONS
Voltage ........................................................120 Vac
PSI Rating ............................. 100 psi max pressure
Hose .................. 25 foot 1/4" OD polyurethane hose
Locking tire chuck and pressure gauge
Utility Cord ........................... 25 feet SJTW 16 AWG
Amps .................................................................... 13
Inflator .............................switches on below 85 psi,
switches off at 100 psi
Task Light Bulbs .......... MR16 GU10 120 V Halogen
bulbs (50 watts maximum)
Auto Shutoff ........................................................Yes
CARTON INVENTORY
Cord Stop
Utility Cord
Work Light
Assembly
Quick-Connect
Locking Inflator
Task Light

Chamberlain GPS1000 Specifications

General

Brand	Chamberlain
Model	GPS1000
Category	Power Supply
Language	English

Summary

INTRODUCTION

SPECIFICATIONS

IMPORTANT SAFETY INFORMATION

WARNING

Critical safety warnings for operating the Garage Power Station to prevent serious injury or death.

CAUTION

Precautions to avoid personal injury, property damage, electric shock, and fire hazards.

INSTALLATION

GROUNDING INSTRUCTIONS

Proper Grounding Procedures

Ensures safe operation by connecting to a properly grounded outlet and using correct wiring.

OPERATION

Work Light Operation

Instructions for turning the integrated work light on and off via the work light assembly.

Tire Inflation

Step-by-step guide for inflating vehicle or bicycle tires using the built-in inflator and gauge.

REPLACEMENT PARTS

TROUBLESHOOTING

Power and Task Light Issues

Diagnosing and resolving problems with the main unit not turning on or task lights failing.

Inflator and Cord Stop Problems

Troubleshooting issues like the inflator running continuously or the cord stop switch not engaging.

WARRANTY INFORMATION