Chamberlain KPW250 User Manual

1
OVERVIEW
The Wireless Commercial Keypad comes with one 9V Lithium battery, instructions, and two keys. A wireless
signal is transmitted when a valid 4-digit PIN and the # key is pressed. A long tone will sound. The keypad
backlight will illuminate for 15 seconds when any key is pressed. If an invalid PIN or partial PIN is accidentally
entered, an error tone will sound. The Wireless Commercial Keypad is compatible with the brands of commercial
door and gate operators listed in the table below.
Wireless Commercial Keypad
Models KPW5 and KPW250
MODEL FREQUENCY AND ENCRYPTION PIN CAPACITY
KPW5 LiftMaster Security+ 2.0™ Default
Tri-band 390 MHz, 315 MHz, and 310 MHz
Up to 5 permanent PINs and
Up to 10 unique temporary PINs
KPW250 LiftMaster Security+ 2.0™ Default
Tri-band 390 MHz, 315 MHz, and 310 MHz
Up to 250 permanent PINs and
Up to 10 unique temporary PINs
LiftMaster Security+
®
315 MHz
LiftMaster Security+
®
390 MHz
Linear Multi-Code 300 MHz
Specifi cations
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9V lithium battery
Operating temperature range . . . . . . . . . . . . . . . . . . . . . . . . . -40°F to 140°F (-40°C to +60°C)
Storage and shipping temperature range . . . . . . . . . . . . . . .-40°F to 140°F (-40°C to +60°C)
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NEMA 3R
KPW5 KPW250

Chamberlain KPW250 Specifications

General

Type	Wireless Keypad
Power Source	Battery
Security	Rolling code technology
Weather Resistance	Yes
Keypad Lock	Yes
Compatibility	Chamberlain and LiftMaster garage door openers
Battery Type	9V
PIN Length	4 digits
Illumination	Yes
Mounting Type	Wall mount
Battery Life	Up to 2 years

Summary

Overview

Specifications

Power

Details the power source for the keypad, specifying a 9V lithium battery.

Operating Temperature Range

Specifies the operating temperature limits in Fahrenheit and Celsius.

Storage and Shipping Temperature Range

Defines the temperature limits for storing and shipping the keypad.

Enclosure

Indicates the enclosure rating, specifying NEMA 3R.

Installation

Basic Programming

Set Master Code

Guides on setting the Master Code for secure system access.

Program a PIN

Details the process for programming a new 4-digit PIN into the keypad.

Program to Operator

Linear Multi-Code

Instructions for programming the keypad for Linear Multi-Code operators.

Additional Programming

Set Temporary PIN

Process for programming temporary PINs for visitor access, up to 9 uses.

Delete PIN

Procedure to remove stored permanent and temporary PINs from the keypad.

Reset Master Code

Steps to reset the Master Code to factory default (888888).

Reset Keypad

Procedure to reset all keypad settings to factory defaults.

Lockout Mode

Information about the keypad's lockout mode and how to enable/disable it.

Battery

Troubleshooting

Limited Warranty

Details the product warranty period and terms for the first consumer purchaser.