Chamberlain LW2200 User Manual

The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.chamberlain.com
CONTENTS
Preparation .............................. 1-4
Assembly ................................. 5-9
Installation ............................ 10-19
Install the Door Control ............. 20-21
Install the Protector System
®
...... 22-25
Power .................................. 26-27
Adjustments .......................... 28-30
Operation.................................. 31
Features ................................... 32
Door Control .............................. 33
Remote Control .......................... 33
To Erase the Memory .................... 34
To Open the Door Manually ............ 34
Maintenance .............................. 35
Troubleshooting ...................... 36-37
Accessories ............................... 38
Warranty .................................. 39
Repair Parts .......................... 40-41
Notes ...................................... 42
1/2 hp Chain Drive
Garage Door Opener
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
■ Periodic checks of the garage door opener are required to ensure safe operation.
■ The model number label is located on the front panel of your garage
door opener.
■ This garage door opener is compatible with Security+ 2.0
®
accessories.
■ DO NOT install on a one-piece door if using devices or features providing unattended
close. Unattended devices and features are to be used ONLY with sectional doors.
Models LW2200 and
HD210
FOR RESIDENTIAL USE ONLY
Serial Number:
Date of Purchase:
Write down the following information
for future reference:
.
.

Chamberlain LW2200 Specifications

General

Type	Chain Drive
Horsepower	1/2 HP
Connectivity	Wi-Fi
Battery Backup	No
Voltage	120V
Compatibility	Standard garage doors
Voice Control	Yes (compatible with Amazon Alexa, Google Assistant)
Safety Sensors	Yes

Summary

Preparation

Assembly

STEP 1 Assemble the Rail and Install the Trolley

Instructions for assembling the rail sections and inserting the trolley mechanism.

STEP 2 Fasten the Rail to the Motor Unit

Guides on securely attaching the assembled rail to the main garage door opener motor unit.

STEP 4 Install the Chain

Instructions for routing and connecting the drive chain to the trolley and threaded shaft.

STEP 5 Tighten the Chain

Installation

Important Installation Instructions

Crucial safety warnings and preliminary steps before commencing the installation process.

STEP 1 Determine Header Bracket Location

STEP 2 Install Header Bracket

STEP 5 Hang the Garage Door Opener

STEP 8 Install the Door Bracket

STEP 9 Connect Door Arm to Trolley

STEP 10 Install the Door Control

STEP 13 Install the Protector System

STEP 14 Wire the Safety Reversing Sensors

STEP 15 Connect Power

Guides on connecting the garage door opener to a power source safely.

STEP 16 Aligning the Safety Reversing Sensors

Procedures for aligning the safety reversing sensors for correct operation.

Adjustments

STEP 1 Program the Travel

Detailed steps for programming the door's open and close travel limits.

STEP 2 & 3 Test Safety Systems

Procedures for testing the safety reversal system and protector system.

Operation

Important Safety Instructions for Operation

Comprehensive safety warnings and guidelines for operating the garage door opener.

Using Your Garage Door Opener

Multi-Function Control Panel Features

To Open the Door Manually

Maintenance

Troubleshooting

Diagnostic Chart

A chart mapping diagnostic codes (arrow flashes) to symptoms and solutions.

Troubleshooting Common Issues

Addresses common operational problems like beeps, remote issues, and non-closing doors.