Chamberlain MC100 User Manual

To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.
Universal Mini Remote Control
Read instructions thoroughly BEFORE beginning.
If using the Universal Mini Remote Control with residential door openers, the remote control must be used only
with door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are
always located on or near the bottom of the door track.
STOP
MODEL MC100
TABLE OF CONTENTS
GETTING STARTED ........................................................................... 2
LOCATE THE PROGRAM/LEARN BUTTON ......................................3-7
Chamberlain
®
products ................................................................ 3
LiftMaster
®
products .................................................................... 4
Overhead Door
®
products ............................................................ 4
Genie
®
products ............................................................................ 5
Linear
®
products........................................................................... 6
Wayne Dalton
®
products .............................................................. 6
Stanley
®
products ......................................................................... 7
GARAGE DOOR OPENERS ..............................................................8-9
Programming to a garage door opener with a
Program/LEARN button ................................................................ 8
Programming to a Genie
®
Intellicode
®
2
garage door opener ...................................................................... 9
COMMERCIAL DOOR OPERATORS ................................................. 10
Programming to a commercial door operator
with a Program/LEARN button ................................................... 10
GATE OPERATORS .......................................................................... 11
Program to a gate operator
with a Program/LEARN button ................................................... 11
EXTERNAL RECEIVERS ................................................................... 12
Programming to an external receiver
with a Program/LEARN button ................................................... 12
MYQ LIGHT CONTROLS .................................................................. 13
NEED HELP? ................................................................................... 14
BATTERY ........................................................................................ 15

Chamberlain MC100 Specifications

General

Brand	Chamberlain
Model	MC100
Category	Universal Remote
Language	English

Summary

Safety and Important Notices

General Safety Warnings

Crucial safety instructions to prevent serious injury or death from moving gates or doors.

Getting Started with Your Universal Remote

Remote Control Overview and Device Compatibility

Explains the remote's function and shows compatible device types like openers, gates, and receivers.

Locating the Program/LEARN Button

Guides users on finding the critical Program/LEARN button on their existing equipment.

Programming Garage Door Openers

Programming to a Garage Door Opener with Program/LEARN Button

Step-by-step guide to program the remote to a garage door opener using its Program/LEARN button.

Programming to a Genie Intellicode 2 Garage Door Opener

Specific instructions for programming the remote to a Genie Intellicode 2 garage door opener.

Programming Commercial Door Operators

Programming to a Commercial Door Operator with Program/LEARN Button

Instructions for programming the remote to a commercial door operator with a Program/LEARN button.

Programming Gate Operators

Programming to a Gate Operator with Program/LEARN Button

Step-by-step guide to program the remote to a gate operator using its Program/LEARN button.

Programming External Receivers

Programming to an External Receiver with Program/LEARN Button

Instructions for programming the remote to an external receiver using its Program/LEARN button.

Programming MyQ Light Controls

Programming to a MyQ Light Control

Instructions for programming the remote to Chamberlain and LiftMaster MyQ Light Controls.

Troubleshooting and Support

Common Remote Control Issues

Addresses common problems like poor range, programming failures, and LED issues.

Battery Information and Replacement

Battery Replacement Instructions

Details on how to safely replace the remote control's battery with the correct type.