To prevent possible SERIOUS INJURY or DEATH from electrocution
or fire:
• Turn off power at the fuse box or circuit breaker BEFORE
proceeding.
• The light control is ONLY for indoor use.
• Installation and wiring MUST be in compliance with ALL local
electrical and building codes.
SPECIFICATIONS
Bulb Type: ..............Compact fluorescent, incandescent, or LED
Max Load Rating:...................................300 Watts
Incandescent Lamp .................................300 Watts
Compact Fluorescent Lamp (CFL)...................... 2.5 Amps
Voltage .............................................120 Vac
NOTE: The wall plate is
not provided.
OVERVIEW
MODES OF OPERATION
REMOTE CONTROL OPERATION:
Allows you to activate the Smart Light Switch
from a remote control.
NOTE: If your remote control is already
programmed to your garage door opener, choose
a different remote control button to program to
the Smart Light Switch.
SMARTPHONE OPERATION:
Allows you to activate the smart light switch from
your smartphone or tablet, set schedules to switch
your lights on/off at customized times, and receive
notifications when your light remains on.
*Smartphone control requires a MyQ
®
Garage, Smart Garage Hub, MyQ
®
Internet Gateway, or Wi-Fi
®
Garage Door Opener.
The Smart Light Switch can be programmed to the MyQ
®
app*, to a Security+ 2.0
®
remote control, or to a MyQ
®
enabled garage door opener.
GARAGE DOOR OPENER OPERATION:
Allows you to synchronize the Smart Light Switch
with your garage door opener light bulbs. The
synchronization with the garage door opener lights
is disabled if you manually turn the light switch on.
The light switch must be OFF to synchronize the
garage door opener with the light switch.
Example: The garage door opener light bulbs are set to automatically turn
off after 4 ½ minutes, the Smart Light Switch will also turn off after 4 ½
minutes.
Switch
LED
NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifications of this
transceiver are prohibited. THERE ARE NO USER SERVICEABLE PARTS.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
AVIS : Les règles de la FCC et/ou d’Industrie Canada (IC) interdisent tout ajustement ou toute modification de
ce récepteur. IL N’EXISTE AUCUNE PIÈCE SUSCEPTIBLE D’ÊTRE ENTRETENUE PAR L’UTILISATEUR.
Cet appareil est conforme aux dispositions de la partie 15 du règlement de la FCC et de la norme IC RSS-210.
Son utilisation est assujettie aux deux conditions suivantes : (1) ce dispositif ne peut causer des interférences
nuisibles, et (2) ce dispositif doit accepter toute interférence reçue, y compris une interférence pouvant
causer un fonctionnement non souhaité.
Learn Button
Cover
CARTON INVENTORY
Screws (2)
Smart Light Switch
Wire Nuts
1
(2)
(1)
The Smart Light Switch offers a
convenient way to control the lights in
your home. It can be programmed to
be controlled from anywhere with your
smartphone and the Chamberlain
MyQ
®
App*. The Smart Light Switch
is also compatible with up to 8
Security+ 2.0
®
remote controls OR a
combination of up to 8 MyQ
®
enabled
garage door openers. This product is
NOT recommended for control of
household appliances or fans. Not for
use with 3-way or 4-way switch
combinations.
SMART LIGHT SWITCH
MODELS WSLCEV AND WSLCEV-P1
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov
To Next Page
Need help?
General
