Champion Power Equipment 100519 User Manual

OPERATOR'S MANUAL
MODEL #100519
6250W OPEN FRAME INVERTER
REV 20210803 Champion Power Equipment, Inc., Santa Fe Springs, CA USA
or visit championpowerequipment.com
SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure
to do so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com

Champion Power Equipment 100519 Specifications

General

Brand	Champion Power Equipment
Model	100519
Category	Portable Generator
Language	English

Summary

Important Safety Instructions

Carbon Monoxide Hazard

Warns about poisonous CO gas from exhaust and operation requirements.

Rotating Parts Hazard

Warns about entanglement with moving parts.

Electrical Shock Hazard

Warns about electrical shock from powerful voltage.

Fire Prevention and Medical Use Warnings

Starter Cord and Overload Cautions

Fuel Safety: Gasoline Flammability and Container Safety

Highlights gasoline flammability and container safety.

Safety Labels and Symbols

CO Danger and Fuel Labels

Shows CO danger and fuel type labels.

Electrical, Fire, and Hot Surface Symbols

Flame and Wet Condition Symbols

Operation Symbols and Quick Start Guide

Starting the Engine Procedure

Step-by-step guide for starting the generator.

Stopping the Engine Procedure

Step-by-step guide for safely shutting down.

Controls and Features Overview

Generator Component Identification

Control Panel Layout and Functions

Details the control panel elements and their uses.

Receptacles and Safety Warnings

Intelligauge Digital Meter

Assembly Instructions

Wheel Kit and Support Leg Installation

Handle Installation and Oil Addition

Instructions for installing the handle and adding engine oil.

Adding Fuel Safely

Steps and safety precautions for adding gasoline.

Operation Procedures

Generator Location and Grounding

Guidelines for placement, ventilation, and grounding.

Surge Protection and Engine Starting

Connecting Loads and Avoiding Overload

How to connect devices and manage generator capacity.

GFCI, Eco Mode, and 12V DC Outlet

Battery Charging, Stopping, and High Altitude

Maintenance Guidelines

Engine Oil and Spark Plug Maintenance

Procedures for changing oil and servicing spark plugs.

Maintenance Schedule

Storage Procedures

Short, Mid, and Long Term Storage

Removing from Storage

Specifications

Generator and Engine Specifications

Oil, Fuel, and Temperature Specifications

Troubleshooting Common Issues

Engine Starting and Running Issues

Solutions for engine not starting or running roughly.

Power, Output, and Tripping Issues