To Next PageTo Next PageWhat causes excessive bouncing while towing Champion Power Equipment 90720 Log Splitter?
If your Champion Power Equipment Log Splitter experiences excessive bouncing while towing, it is probably because of under-inflated tires. Inflate the tires to the proper pressure, referring to the tire sidewall for guidance.
Why is wedge movement slow or erratic on Champion Power Equipment Log Splitter?
If the wedge movement is slow or erratic on your Champion Power Equipment Log Splitter, it might be due to air in the hydraulic oil system. Purge the air by extending and retracting the wedge several times until the motion is smooth. Also, check for debris lodged in the beam guides and clear any debris from the beam. Finally, verify the hydraulic oil level and add more if needed.
What to do if Champion Power Equipment Log Splitter engine cannot supply enough power or overheating?
If your Champion Power Equipment Log Splitter engine is not supplying enough power or is overheating, check for any air restriction and move the log splitter to a well-ventilated area.
General| Brand | Champion Power Equipment |
|---|---|
| Model | 90720 |
| Category | Log Splitter |
| Language | English |
