Champion PRO - Connecting to Carlson SurvCE as a Network Rover

7. Configuring through a web browser
Champion PRO GNSS Receiver User Guide Page 14
UHF Bar Antenna (450-470 MHz)
Optional OTG Cable
USB Cable with power socket
Optional serial cable with power
socket
Lithium Batteries
Auxiliary H.I. Tool
Tribrach adaptor
Hard Case
2.6. CONNECTING TO AN OFFICE COMPUTER
The receiver can be connected to an office computer for serial data transfer or
settings via a GPS to PC Data Cable. Before you connect to the office computer,
ensure that the receiver is powered on by the internal battery or external power.