www.chamsys.co.uk MagicQ Console Quick Start Manual
Page 19 of 40
Supported touch monitors
For the MQ70 & MQ80 consoles we have tested and recommend the iiyama Prolite T2336MSC, Hanns G
HT225HPB, Asus VT207N and Dell S2240T Touch monitors. Note these are not supported on MQ60 console.
MagicQ consoles have support for the following USB communication protocols:
• Elo 15 * E271-2210 10-byte protocol
• Elo legacy E281A-4002 6-byte protocol
• Elo 16 * legacy E271-140 4-byte protocol
• Elo legacy E261-280 3-byte protocol
• eGalax Touchkit
• eTurboTouch CT-410/510/700
• 3M/Microtouch EX II series
• ITM
• PanJit TouchSet
• eTurboTouch
• Gunze AHL61
• DMC TSC-10/25
• IRTOUCHSYSTEMS/UNITOP
• IdealTEK URTC1000
• General Touch
• GoTop Super_Q2/GogoPen/PenPower tablets
• JASTEC USB touch controller/DigiTech DTR-02U
• Zytronic capacitive touchscreen
• NEXIO/iNexio
To Next Page
Loading...
Need help?
General
