Simple Remote
Alternative Remote Control for Apple TV (Generation 4)
& Channel Master DVR’s
CM-7000XRC
© 2020 Channel Master L.L.C. Channel Master is a registered trademark. Specications subject to change. All rights reserved. © 2020 Channel Master. Channel Master
es una marca registrada. Especicaciones sujetas a cambio. Todos los derechos reservados. © Channel Master, 2020. Channel Master est une marque déposée. Les
caractéristiques peuvent être modiées sans préavis. Tous droits réservés. Pub CM3205.IS.202001
ChannelMaster.com
• Simple Remote uses IR commands which means line of sight between the
Apple TV and Simple Remote control is required.
• Simple Remote DOES NOT support Bluetooth functions including voice search.
• The Simple Remote comes from the factory with a plastic Isolator in the battery
compartment to preserve battery life before initial use. You will need to ensure
the plastic isolator is removed prior to rst use.
• The Simple Remote has universal functionality which allows it to be
programmed to control the on/off and volume functionally of most brands of
TV’s and soundbars. (Note: Simple Remote will not conrol other TV functions
besides Power On/Off and Volume +/-)
Simple Remote Overview Important Details:
The Channel Master Simple Remote
was designed to specically
work with 4th generation Apple
TV units and to provide a more
conventional remote control user
experience. The Simple Remote
is pre-programmed to work with
Apple TV units out of the box or it
can also be programmed to work as
a replacement remote control for
Channel Master DVR’s.
Using the Simple Remote
Apple TV Menu
Select
Rewind
Skip Back
Stop
Mute
TV/Soundbar Volume
TV/Home/Control Center
Navigation
Fast Forward
Skip Forward
Play/Pause
Channel Up + Down
(compatible with select TV streaming apps)
To Next Page
Need help?
General
