Char-Broil Alpine User Manual

WARNING
NEVER LEAVE FIRE UNATTENDED!
Do not allow small children near flame. Hot embers can
fly out in breezy conditions. Adequate fire extinguishing
material should be readily available.
WARNING
CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon
monoxide, which has no odor. NEVER burn charcoal
inside homes, vehicles or tents.
Read and follow all safety statements, warnings,
assembly instructions and use & care directions before
attempting to assemble.
CAUTION
CAUTION
Some parts may contain sharp edges – especially as
noted in manual. Wear protective gloves if necessary.
WARNING
Do not use this unit on or near combustible surfaces or
structures such as wood decks, dry leaves or grass, vinyl
or wood siding, etc. SEE OWNER’S MANUAL FOR
IMPORTANT SAFETY INFORMATION.
CAUTION
THIS UNIT IS HEAVY!
DO NOT assemble without a helper.
42804047 (12-14-05)
0420110104501134
For Outdoor Use Only
Alpine
Outdoor Fireplace
WARNING
All surfaces can be hot during use. Use protection as
required to prevent burning.

Char-Broil Alpine Specifications

General

Brand	Char-Broil
Model	Alpine
Category	Outdoor Fireplace
Language	English

Summary

Safety Information

General Safety Precautions

Essential safety warnings, including unit weight, sharp edges, and general use precautions.

Parts List

Hardware Details

Assembly Tools Required

Lists the specific tools needed for assembling the fireplace.

Assembly Instructions

Step 1: Attach Door Frames

Connect door frames to the ash pan using specific screws and nuts.

Step 2: Attach Side Panels

Secure side panels to the ash pan, leaning them against door frames.

Step 3: Attach Top Component

Fasten the top section to the side panels and door frames with screws and nuts.

Step 4: Install Doors

Attach the doors to the door frames using machine screws and hex-keps nuts.

Step 5: Install Chimney and Log Rack

Secure the chimney pipe and place the log rack inside the fireplace.

Use and Maintenance

Surface Care and Rust Prevention

Guidance on maintaining steel, cast iron, and metallic surfaces, including rust concerns.

California Proposition 65 Warning

Information regarding chemicals in combustion by-products known to cause harm.

Limited Warranty Information

Warranty Coverage Details (90 Days)

Specifies the 90-day warranty period for all components and exclusions.