CLEANING & MAINTENANCE
CAUTION:
ALLOW APPLIANCE TO COMPLETELY COOL BEFORE CLEANING ANY COMPONENT.
• To change or remove the oil, rst allow oil to cool. Then remove the
COOKING TANK from HOUSING. Pour the oil out at the corner.
• To clean the deep frying fat container, wipe the LID and the HOUSING
with a damp cloth and household detergent if necessary. DO NOT
immerse in water.
• The FRYING BASKET can be cleaned with soapy water.
• Ensure that all moisture is removed prior to storage or use.
• Clean the HOUSING after use with a slightly damp cloth.
WARNING:
NEVER add water to the oil!
Oils and fats may burn when overheated. PLEASE BE CAREFUL!
DO NOT forget to switch the device off after use! First turn the thermostat
to the lowest position and then remove the power cord.
WARNING:
Please note this important information if you intend to use fat!
If you use fat, please divide it up into small pieces. Turn the thermostat to
a low temperature and add the pieces slowly. Once the fat has melted and
the correct oil level is reached you can set the desired temperature on the
thermostat.
Under no circumstances should you place the fat in the deep frying
basket!
3
To Next Page
Loading...