Chard FG-500 - How to Use: Operation; Operating and Grinding with the Unit

HOW TO USE
How to Use:
Tip: Partially frozen food grinds much more efciently than fully thawed
food. We recommend that frozen food be partially thawed before grinding or
thawed food be partially frozen prior to grinding. Never attempt to grind fully
frozen food.
1. After unit is fully assembled per instructions above, conrm that power switch
is in the OFF position (rocker switch is in the middle position.)
2. Insert plug into wall outlet.
3. Conrm grinder is on stable work surface.
4. Place a wide shallow bowl or plate directly below the grinder head.
5. Turn power switch to ON position by pushing the top portions of the rocker
switch to the “-” position. The grinder must always be in the ON position
before adding food.
6. Place food to be ground into die-cast hopper and use pusher to push food
through opening.
Note: Reverse Switch
7. If food becomes jammed, turn rocker switch to the off position. To clear jam,
turn rocker switch to reverse (as pictured). Next press reverse switch (as
pictured) until food is cleared. Disassembly may be required to clear jam.
Note: Always unplug cord from outlet before disassembling.
Tip: Never attempt to grind bone or other solid objects as this will cause
permanent damage to the grinder.
3