What to do if the 'WATER' indicator is on for my Chard Ice Maker?
If the 'WATER' indicator is illuminated, it means that the appliance is experiencing a lack of water or one of the water filters is blocked. To resolve this, stop the ice maker, replace the water bottle with a new, full one, and then restart the appliance. Also, check both water filters and clean them.
Why is the 'ICE' indicator on my Chard IM-15SS?
The 'ICE' indicator turns on when the ice basket is full. To solve this, simply pull out the ice basket and empty it.
What to do if ice cubes stick together in my Chard Ice Maker?
If you notice that the ice cubes are sticking together, it could be due to a too long ice cycle or low water temperature in the inner tank. Stop the ice maker, and restart it when the ice blocks melt. Also, select the small ice button. Consider changing the water in the inner tank, keeping the water temperature between 45?-90?.
Why is my Chard IM-15SS not making ice even though the cycle seems normal?
If your ice maker is running its normal cycle but not producing ice, the ambient or water temperature in the inner tank might be too high. Please ensure you run the ice maker below 90? and use colder water in the tank. If this doesn't solve the problem, have a qualified technician check for refrigerant liquid leakage or a blocked pipe in the cooling system.
Essential safety advice for setting up and using the ice maker.
Overview of the physical parts of the ice maker.
Identification and function of buttons and indicators on the control panel.
Step-by-step guide for unpacking, cleaning, and preparing the unit for use.
Instructions on how to operate the ice-making function and select cube size.
Guidance on how to dispense cold drinking water.
Detailed technical data and specifications of the ice maker.
To Next Page
General
