Charge COMFORT - Page 11

11
7. Lit the bike over to the front
wheel.
8. Lower the fork onto the front wheel
until the axle is fully-engaged in the
fork end.
9. While holding the bike upright, put
the kickstand down with your foot.
The bike will now safely rest on the
kickstand.
10. Locate the metal axle rod and axle
nut from the parts box.
CORRECT
7
8
9
NOTE: While the wheel axle does
not extend past the fork end,
it is enough for the fork to rest
securely, as pictured
NOTE: Always screw the axle nut
onto the rod with the larger end
fi rst.
NOTE: The disc brake rotor on the
wheel should be on the same side
as the kickstand.
10
Axle Nut
Rod