13
15. With your let hand, hold the
bike upright and centered
(perpendicular to the floor).
16. Push the frame down to ensure the
fork ends are fully seated on the
axle.
1 7. Holding the bike upright with one
hand, use your free hand to insert
the Torque Wrench into the axle on
the brake disc side.
18. Turn the Torque Wrench clockwise
until you hear and feel a click. This
indicates the correct torque has
been achieved.
NOTE: You may need to apply a
good deal of pressure to hear and
feel the click.
CLICK!
17
18
15-16
To Next Page
