What to do if Chattanooga Hydrocollator SS-2 packs are too cool?
If the packs in your Chattanooga Heating System are too cool: 1. The thermostat might be set too low. Adjust the thermostat to a higher setting. 2. The thermostat may have failed. If adjusting doesn't help, consider replacing the thermostat.
Why does my Chattanooga Heating System boil?
If your Chattanooga Heating System is boiling, it is likely due to thermostat failure. Replace the thermostat.
General| Model | SS-2 |
|---|---|
| Tank Capacity | 2 gallons |
| Material | Stainless steel |
| Type | Hydrocollator |
| Power Supply | 120V |
| Heating Element | Immersion type |
| Safety Features | automatic shut-off |
The precautionary instructions found in this section and throughout this manual are indicated by specific symbols.
Explains safety infractions that could have the potential to cause minor to moderate injury or damage to equipment.
Explains possible safety infractions that will potentially cause serious injury and equipment damage.
Explains possible safety infractions that are imminently hazardous situations that would result in death or serious injury.
Helpful information to aid in the particular area or function being described.
Read, understand, and practice the precautionary and operating instructions. Know the limitations associated with the Hydrocollator.
Grounding the Hydrocollator SS-2, M-2, and M-4 Mobile Heating Unit: Make certain the unit is electrically grounded.
When illuminated, indicates that main power is connected, the switch is on and unit is operating.
When illuminated, warns of an overheat/low water condition. Action is necessary to correct the condition.
When illuminated, indicates that main power is connected, the switch is on and unit is operating.
Labeled diagram of unit components and rear views, identifying key parts.
Notes that the M-4 model is shown and specific buttons apply to certain voltage units.
Labeled diagram of more unit components and rear views.
Lists parts not shown in the diagrams for various Hydrocollator models.
Details power supply, frequency, consumption, capacity, temperature, dimensions, and weight for the SS-2.
Details power supply, frequency, consumption, capacity, temperature, dimensions, and weight for the M-2.
Details power supply, frequency, consumption, capacity, temperature, dimensions, and weight for the M-4.
Explains how to operate the Hydrocollator, including controls, thermostat adjustment, and continuous use.
Instructions on maintaining the unit's cleanliness and water level for optimal performance.
Safety warnings regarding moving the unit when filled and unplugging before emptying water.
Specific steps to prevent rusting of the stainless steel unit by avoiding certain cleaners and materials.
Provides practical tips for cleaning the interior of the Hydrocollator unit.
Instructions on how to heat, clean, store, and replace Hydrocollator HotPacs for longevity.
Lists items and conditions that are explicitly excluded from the product warranty coverage.
Disclaimer regarding incidental or consequential damages related to product use or failure.
Provides instructions for claiming warranty service and contact information for support.
To Next Page
