5. MOBILE PHONE CONNECTION
(1) Mobile Phone Pairing :
① On power off mode :
② Press and hold POWER button (A) for 8 seconds until the LED turns and
flashes in Red and Blue.
③ Turn on a Bluetooth function in your phone and search and select the
name of the unit (ChatterBox BiT-3 V 2.91)
④ Certain mobile-phones may require a password <password : 0000>
⑤ After completion of the pairing, slow Blue-LED flashes twice regularly
with a beep sound..
⑥ As phone pairing is finished, turn the power off and on again to prevent
a sudden volume increase.
★Notice for iPhone users;
iPhone’s volume can be rapidly increased while setting this device. In
order to prevent the unintentional volume increase, please set the unit at
the minimum volume level.
(2) Second Mobile-Phone Pairing
① After pairing of the first phone, please make sure to turn off the BiT-3
unit and the Bluetooth function of the first phone.
② Press and hold POWER button (A) of the unit for 8 seconds until the
LED turns and flashes in Red and Blue.
③ Turn on the Bluetooth function of the second mobile-phone and search
and select the name of BiT-3 (ChatterBox BiT-3 V2.91)
④ After completion of the pairing, slow Blue LED flashes twice regularly
with a beep sound..
(3) NEW MOBILE PHONE (The Third Phone) REPLACEMENT
① Turn off one of the previously paired mobile phone’s Bluetooth
functions or delete one the paired unit’s name (ChatterBox BiT-3 V2.91)
from your Bluetooth list.
② On power off mode, press and hold POWER button (A) of the unit for
8 seconds until the LED turns and flashes in Red and Blue.
③ Turn on the Bluetooth function in a new mobile-phone you desire to
pair and search and select the name of the unit (ChatterBox BiT-3
V2.91)
④ Certain mobile-phones may require a password <password : 0000>
To Next Page
Loading...