⑤ After completion of the pairing, slow Blue-LED flashes twice regularly
with a beep sound.
⑥ As phone pairing is finished, turn the power off and on again to
prevent a sudden volume increase.
★Notice for iPhone users;
iPhone’s volume can be rapidly increased while setting this device. In
order to prevent the unintentional volume increasing, please set the unit
at the minimum volume level.
6. PHONE
Answer : Short press MAIN FUNCTION(C) button
Put on hold : Short press MAIN FUNCTION(C) button
Reject : Long press MAIN FUNCTION button(C) for 2.5 seconds
Hang up : Long press MAIN FUNCTION button (C) for 2.5 seconds
Voice calling : Long press PLUS button(D) for 1.5 seconds
Last number redial : Long press MINUS button(E) for 1.5 seconds
★NOTE : Voice calling & Last Number functions only work for the last
number you dialed no matter how many phones are paired.
Automatic Answer Call : Incoming calls remained idle for more than 20
seconds will be answered automatically
Transfer Audio sound from Device to Mobile, and Vice Versa :
On the power-on mode, press and hold PLUS (D) and MINUS (E) buttons
simultaneously
Put the current call on hold, Answer an incoming call :
- Short press MAIN FUNCTION button (C)
Hang up the current call, Answer an Incoming call :
- Double press MAIN FUNCTION button (C)
Put the current call on hold, Reject an Incoming call :
- Long press MAIN FUNCTION (C) for 1 second
Switch to the other phone : Short press MAIN FUNCTION button(C)
Switch to the music : Long press MAIN FUNCTION button (C)
★As two mobile-phones are connected, there can be a little delay on the
music play mode for a certain type of mobile-phone.
To Next Page
Loading...