EasyManua.ls Logo

ChatterBox BiT-3 - Intercom Functions; Intercom Pairing Procedure

ChatterBox BiT-3
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To shift function from the first mobile-phone to the Second mobile-
phone and vice versa, long Press Main Function Button for 2.5 seconds.
For a certain type of Mobile-phone, music volume can be
simultaneously controlled or separately controlled.
7. MUSIC
Enter Music Mode : Double press MAIN FUNCTION button(C)
Exit Music Mode : Double press MAIN FUNCTION button(C)
Music Play : Short press MAIN FUNCTION button(C)
Music Stop : Short press MAIN FUNCTION button(C)
Mute : Short press MAIN FUNCTION button(C)
Fast forward : Double press PLUS button(D)
Rewind : Double press MINUS button(E)
8. VOX (To connect Intercom by using own voice)
VOX on : say loudly Hello, Hello toward to the Microphone
VOX sensitivity control :
VOX 1 ( Sensitive )
: Press PLUS + MINUS button at the same time for 5 seconds.
VOX 2 ( Average Sensitive )
: Press PLUS + MINUS button at the same time for 5 seconds.
VOX 3 ( Insensitive )
: Press PLUS + MINUS button at the same time for 5 seconds.
VOX 4 (VOX off disable the function)
: Press PLUS + MINUS button at the same time for 5 seconds.
Paired Intercom remained idle for a certain amount of time will be
changed into the standby mode automatically.
After Intercom pairing, VOX turned on by a loud voice allows
entering or returning to the Intercom mode.
Even on the standby mode, Music mode, and FM-Radio mode, you
can answer an incoming call by VOX (shouting).
9. INTERCOM
Intercom Pairing

Other manuals for ChatterBox BiT-3