Need help?Do you have a question about the Chauvet DJ Intimidator Scan 110 and is the answer not in the manual?
General| Type | Moving Head Scanner |
|---|---|
| Voltage | 100-240V, 50/60Hz |
| Pan Range | 540 degrees |
| Gobo | 8 gobos + open |
| Control | DMX |
| Dimmer | 0-100% |
| Colors | 7 colors + white |
Lists the items included in the product package.
Steps for carefully unpacking the product and checking contents.
Procedure for reporting shipping damage or missing components.
Explains the meaning of text conventions used throughout the manual.
Defines warning and informational symbols used in the manual.
Legal disclaimer concerning the accuracy and liability of the manual's content.
Information regarding copyright and trademarks of Chauvet.
Crucial safety precautions for operation, installation, and handling.
Provides a general description and features of the Intimidator Scan 110.
Details the physical size and measurements of the product.
Information on power supply, voltage compatibility, and grounding.
Step-by-step instructions for replacing the product's fuse.
Guidelines for connecting multiple units to share power.
Instructions and diagrams for securely mounting the fixture.
Information on permissible mounting positions for ventilation.
Best practices and safety considerations for rigging the product.
Guide to using the buttons and display for product control.
Overview of the menu structure and function options.
Settings for controlling the product via DMX.
How to set the DMX starting address for channel control.
Explanation of available DMX channel modes (personalities).
Details DMX channel assignments and value ranges for functions.
Modes for operating the product without a DMX controller.
Instructions to run built-in automatic light shows.
How to configure and operate the product in sound-activated mode.
Adjusting the sensitivity level for sound-active response.
Operating the product's functions manually through the control panel.
Product settings including motor direction and firmware.
Option to reverse the direction of the pan motor.
Option to reverse the direction of the tilt motor.
Fine adjustment for Pan, Gobo, and Tilt motor positions.
Procedure to view the current firmware version installed on the product.
Steps to restore the product to its original factory default settings.
Instructions for linking multiple units for synchronized operation.
Guidelines for cleaning and maintaining the product's performance.
To Next Page