What to do if my Chauvet DMX-4 Dimmer has no power?
If your Chauvet Dimmer isn't powering on, first, check if there is power on the Mains. If the Mains are working, check the device’s fuse, both internal and external.
How to fix a dim beam on my Chauvet DMX-4 Dimmer?
If the beam on your Chauvet Dimmer is very dim or not bright, you can clean the optical system or replace the lamp. Also, check the 220/110v switch for the proper setting.
Why is my Chauvet Dimmer fixture not responding?
If your Chauvet Dimmer fixture is not responding, check the DMX Dip switch settings for correct addressing. Also, check the DMX cables and the polarity switch settings.
What to do if the breaker/fuse keeps blowing on my Chauvet DMX-4?
If the breaker or fuse keeps blowing on your Chauvet Dimmer, check the total load placed on the device.
Why is there no audio movement on my Chauvet Dimmer?
If your Chauvet Dimmer fixture is on but there is no movement to the audio, make sure you have the correct audio mode on the control switches. If audio is provided via a ¼” jack, ensure a live audio signal exists. You can also adjust the sound sensitivity knob.
Why does the lamp cut off sporadically on my Chauvet Dimmer?
If the lamp on your Chauvet Dimmer cuts off sporadically, it could be a bad lamp or the fixture is overheating. The lamp may also be at the end of its life.
What to do if my Chauvet DMX-4 Dimmer device has no power?
If your Chauvet Dimmer device isn't powering on, first, check the mains to ensure there is power. Then, inspect the device's fuse, both internal and external, for any signs of damage or failure.
How to fix Chauvet DMX-4 Dimmer fixture that is not responding?
If your Chauvet Dimmer fixture isn't responding, check the DMX dip switch settings to ensure they are correctly addressed. Also, inspect the DMX cables for any damage or loose connections and verify the polarity switch settings.
Why is my Chauvet Dimmer beam very dim or not bright?
If the beam on your Chauvet Dimmer is very dim or not bright, try cleaning the optical system or replacing the lamp. Also, check the 220/110V switch to ensure it's set correctly.
What to do if Chauvet DMX-4 Dimmer breaker/fuse keeps blowing?
If the breaker or fuse keeps blowing on your Chauvet Dimmer, check the total load placed on the device.
Covers electrical, environmental, and operational safety for the product.
Instructions for power connection and fuse replacement.
How to operate in dimmer/switch mode, especially with LED loads.
Explanation of control panel buttons and the menu structure.
Steps to configure the product for DMX control and set starting address.
How to set up and use automatic programs, speed, and dimming.
Details power input, output, fuse ratings, and voltage selection.
Power| switch-selectable power setting | 115V 60 Hz or 230V 50 Hz |
|---|---|
| european version voltage | 240V 50 Hz |
| AC output (115V) | 10A/Channel, Max 20A |
| AC output (230V) | 5A/Channel, Max 10A |
Fuse| main fuse (115V) | (4) 20mm Glass 10A 125V Fast Blow |
|---|---|
| main fuse (230V) | (4) 20mm Glass 6.3A 250V Fast Blow |
Weight and Dimensions| length | 210 mm (8.25 in) |
|---|---|
| width | 194 mm (7.65 in) |
| height | 70 mm (2.75 in) |
| weight | 2.3 Kg (5 lbs) |
To Next Page
