Need help?Do you have a question about the Chauvet TFX-D6 and is the answer not in the manual?
Lists all items that come with the TFX-D6 Stage Dimmer 6 fixture.
Provides steps for carefully unpacking the fixture and checking contents for damage.
Details critical safety precautions related to voltage, fire, moisture, and ventilation.
Highlights key functionalities and specifications of the TFX-D6 dimmer.
Identifies and describes components on the front and rear panels of the dimmer.
Explains Analog I/O panel and DMX IN/OUT connector configurations.
Details the operational functions of the MENU, UP, DOWN, and ESC buttons.
Instructions for mounting the dimmer pack into a standard 19" EIA rack.
Guidelines for ensuring adequate air flow and preventing overheating during installation.
Details single-phase and three-phase input power wiring and specifications.
Wiring diagram for connecting output power to the dimmer channels.
Explains Analog 0-10VDC and DMX512 control wiring pin configurations.
Describes the initial display and entry into standby mode upon powering on.
Provides an overview of how to navigate through the dimmer's menu system.
Instructions for manually setting temporary intensity for channels or all channels.
Steps to enter and navigate the primary setup menu for configuration.
Configures dimmer response (Hold, Analog, Programs) when DMX signal is lost.
Enables or disables AC phase correction for improved dimming performance.
Configures DMX addressing using Block or Single channel modes.
Configures preheat voltage for all channels or individual channels to protect lamps.
Allows selection of Linear, Square, or Switch dimmer curves for channels.
Explains the characteristics and use cases of different dimmer curves.
Basic explanation of DMX-512 protocol, channels, and addressing principles.
Guidelines for connecting multiple DMX fixtures in a daisy chain and termination.
Details the pinout for DMX IN/OUT connectors and signal wiring.
Chart detailing the correct pin conversion for 3-pin to 5-pin DMX adapters.
Instructions for cleaning and maintaining the dimmer for optimal performance.
Information on how to return a product and file claims for damages.
Details the dimensions, weight, and physical attributes of the dimmer unit.
Specifies input voltage, current, and output power per channel at different voltages.
Describes output panel type and overload protection mechanisms.
Lists data input/output, pin configuration, protocols, DMX channels, and analog control.
Provides the model number for ordering the TFX-D6 Stage Dimmer 6.
Power| input power voltage | 115V 60 Hz or 230V 50 Hz |
|---|---|
| single-phase input | 120/230 VAC, 60 Amps, 50-60Hz |
| three-phase input | 120/230 VAC, 60 Amps, 50-60Hz |
Output| output capacity at 120VAC | 1200 Watts per channel |
|---|---|
| output capacity at 230VAC | 2300 Watts per channel |
| output panel | Hard-wired terminal blocks |
Weight and Dimensions| length | 452 mm |
|---|---|
| width | 483 mm |
| height | 89 mm |
| weight | 9.98 Kg |
To Next Page
