CHC i80 - Introduction to CHC i80 GNSS Receiver; Safety Information and Regulations

i80 GNSS Receiver Quick Tour with FieldGenius (Internal UHF Base)
5
12. Type in the PIN Code of the bluetooth
then click [OK] button to finish the device
edit.
13. Then our target device can be selected in
the bluetooth device list. Click [OK] button
back to [Model and Communication]
interface.
14. The target device can be selected in the
drop-down box then click [Connect] button.
The software will build the connection to your
device
15. After successful connection, FieldGenius
will display the following hint, please click [OK]
button