Classification [Protected] P/N:707479
© 2018 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
Smart-1 Installing and Removing
Storage Devices
707479
Protected
2018
This document is for appliance models Smart-1 525, Smart-1 5050, and
Smart-1 5150.
Safety Instructions
• Lift the appliance with assistance. To avoid injury, do not attempt to lift the
appliance by yourself.
• Opening or removing the appliance cover, while the appliance is powered on
may expose you to a risk of electric shock.
• Do not operate the appliance without the cover for more than five minutes.
Operating the appliance without the cover can result in component damage.
• Many repairs may only be done by a certified service technician. Only
perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the technical support.
• We recommend that you always use an antistatic mat and antistatic strap on
your wrist, while working on components inside the appliance.
• To ensure proper operation and cooling, all bays in the appliance and
cooling fans must be always populated with a component or a blank.
For more information, see the
Enterprise Products Safety, Environmental, and
Regulatory Information
booklet supplied in the original appliance shipping
carton.
To Next Page
Need help?
General
