EasyManua.ls Logo

Cheetah 10-068 - User Manual

Cheetah 10-068
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Programming Manual
P/N 06-651, Rev. 1
September 2013
10-068, Cheetah
®
Xi
Addressable Fire Suppression Control System

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cheetah 10-068 and is the answer not in the manual?

Summary

1.0 About This Manual

1.3 Safety Information

Highlights important safety warnings and cautions related to system operation and equipment.

2.0 C-Linx Programming Options

2.2 Software Programming Features

Lists configurable features available through the C-Linx programming software.

3.0 Getting Started

3.2 Password Protection

Explains the password system for restricting access to system menus and functions.

3.4 How to Address a Device

Outlines various methods for assigning unique addresses to field devices connected to the system.

4.0 Configuration Menu

4.2.1 How to Configure a Field Device

Guides on modifying operational parameters for addressable devices via SLC.

4.4.1 How to Set Peripheral Device Parameters

Provides access to configuration parameters for the panel's peripheral devices.

4.5.2 How to Configure VESDA Detectors

Allows modification of operating parameters for connected air sampling detectors.

4.6.2 How to Auto Address Devices

Enables the panel to identify and assign addresses to new devices on the SLC.

4.6.4 How to Configure Panel Network

Provides configuration options for the panel's P20 network module.

4.7.1 How to Set Panel’s IP Addresses

Sets IP address configuration parameters for the panel's Ethernet module.

4.7.2 How to Configure Panel for Network Supervision

Configures the panel to supervise other fire panels on the same Ethernet network.

Cheetah 10-068 Specifications

General IconGeneral
BrandCheetah
Model10-068
CategoryControl Systems
LanguageEnglish

Related product manuals