Need help?Do you have a question about the Cheetah Xi and is the answer not in the manual?
Highlights important safety warnings and cautions for system operation and equipment.
Lists configurable features available via C-Linx software, noting UL listing compliance.
Explains password levels and access restrictions for system menus and features.
Outlines two primary methods for system configuration: Auto Program and Engineered Configure.
Details various methods for assigning unique addresses to field devices for project requirements.
Guides users on modifying operational parameters of addressable devices connected to the SLC.
Adjusts device alarm features, including function, custom messages, and zone settings.
Sets pre-discharge type and countdown for device release features affecting system response.
Guides on programming the panel's two on-board notification appliance circuits (NAC #1 and NAC #2).
Sets operational parameters for NACs, including state, protocol, silenceable, and drill status.
Initiates learning of all installed addressable devices connected to the panel's SLCs.
Adjusts day/night sensitivity for smoke sensors, enabling different alarm thresholds.
Accesses configuration parameters for peripheral devices.
Modifies basic operating parameters for peripheral devices connected to the RS485 peripheral bus.
Enables or disables the system's Walktest feature from the panel's Maintenance Menu.
Configures the panel abort type for system release.
Enables or disables the day/night detector sensitivity function for smoke sensors.
Changes operating parameters for air sampling detectors connected to the panel.
Configures panel recognition of air sampling detectors via High Level Interface (HLI) module.
Configures VESDA pre-discharge type, level, and countdown affecting system response.
Sets operating parameters for the Cheetah Xi's on-board relays and optional CRM4 relays.
Sets unique panel ID and supervision for network panels.
Configures the panel to participate in a networked system via RS485 or Fiber Optic.
Sets IP address configuration parameters for the panel's Ethernet module.
General| RAM | 16 GB DDR4 |
|---|---|
| Operating System | Windows 10 IoT Enterprise |
| Weight | 2.5 kg |
| Processor | Intel Core i7 |
| Connectivity | Gigabit Ethernet, Wi-Fi, Bluetooth |
| Ports | USB 3.0, HDMI, DisplayPort, RS-232 |
| Series | Xi |
To Next Page
