1.0 ABOUT THIS MANUAL
Cheetah Xi Programming Manual 1-1
P/N: 06-651 Rev 0, 06/2012
1.1 ABOUT THIS MANUAL
This manual is intended for those individuals who are responsible for the programming of the Fike Cheetah Xi
Addressable Control System. It provides a detailed description of how use the control panels configuration
menus to field-program the systems operating parameters. Changes to the system configuration shall only be
made by a factory trained and certified technician.
1.2 PRODUCT SUPPORT
If you have a question or encounter a problem not covered in this manual, you should first try to contact the
distributor that installed the protection system. Fike has a worldwide distribution network. Each distributor
sells, installs, and services Fike equipment. Look on the inside of the door, left side, there should be a sticker
with an indication of the distributor who sold the system. If you can not locate the distributor, please call Fike
Customer Service for locating your nearest distributor, or go to our web-site at www.fike.com. If you are
unable to contact your installing distributor or you simply do not know who installed the system you can
contact Fike Fire Alarm Product Support at (888) 628-FIKE (3453) Option 2, Monday through Friday, 8:00 AM
to 4:30 PM CST.
1.3 SAFETY INFORMATION
Important safety admonishments are used throughout this manual to warn of possible hazards to persons or
equipment.
a WARNING
Warnings are used to indicate the presence of a hazard
which will or may cause personal injury or death, or loss
of service if safety instructions are not followed or if the
hazard is not avoided.
I Caution
Cautions are used to indicate the presence of a hazard
which will or may case damage to the equipment if
safety instructions are not followed or if the hazard is not
avoided.
LNotes: Notes indicate the message is important, but is
not of a Warning or Caution category. These notes can
be of great benefit to the user and should be read.
To Next Page
Loading...
