8
used, the marked electrical rating of the extension cord should be at least 10 amperes.
The longer cord should be arranged so that it will not hang over the counter top or
tabletop where it can be pulled on by children or pets or tripped over.
Cleaning and Maintenance
Note: Before cleaning or removing any part of the grinder for maintenance, always
turn the unit “off” and unplug the cord from the outlet. Never immerse the motor
housing in water or other liquid.
Cleaning: Grinder parts can be removed and disassembled from the motor housing
for thorough cleaning as described in previous sections (page 5). Wash in warm soapy
water with a soft cloth or sponge. Careful! The cutting blade has very sharp edges and
the holes in the grinding plate also have sharp edges. Keep hands clear!
After cleaning, sparingly coat the grinding plate, cutting blade, auger and locking ring
with vegetable oil.
Never use steel wool or scouring powder on any parts.
Do Not wash any of the detachable parts of the grinder in a dishwasher.
The grinder’s motor housing can be cleaned by wiping with a soft, moist cloth.
Service
This appliance is for household use only. No user-serviceable parts are inside.
In the event service is needed, you may return your meat grinder to EdgeCraft Corp.,
where the cost of repair or electrical or mechanical adjustment can be estimated before the repair is undertaken.
Please include your return address and a brief description of the problem or damage to the grinder on a separate sheet
inside the box.
Send your grinder, insured and postage prepaid to:
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Telephone 800-342-3255 or 610-268-0500
www.chefschoice.com
Retain evidence of shipping for your protection.
Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and workmanship for a period of two (2) years from the
date of original purchase (“Warranty Period”). We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge
if the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This warranty does not apply to commercial use or any
product abuse. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations
on how long an implied warranty lasts and some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Conforms to: UL 982 Certified to CAN/CSA: C22.2#64 Printed in China.
© EdgeCraft Corporation 2014 G14 G720200
Figure 3. Cord wraps under
base of grinder.
Overload/reset
switch
To Previous Page
Loading...