14
2. Press down firmly on the capsule to puncture the bottom and lock it into place. Twist on
the capsule holder lid, making sure it is tightly closed.
3. To insert the capsule holder into the portafilter, simply drop it in lid side down.
HOW TO PLACE THE PORTAFILTER ON THE BREW HEAD
1.
Position the portafilter underneath the brew head with its handle facing to the left.
2.
With one hand on top of the unit to steady it, insert the portafilter up into the brew
head, lining up the handle with the open lock icon on the unit.
3.
Slowly turn the handle to the right until resistance is felt and the handle is aligned with the
locked icon on the unit; the handle will be at an approximately 90° angle to the machine.
OPERATING INSTRUCTIONS
To Next Page
Loading...
