Instructions To Use Your Mini Food Chopper
WARNING: Always assemble the product completely before plugging it into an
electrical outlet.
CAUTION: To prevent product damage, do not chop ingredients such as raw meat,
cheese, coffee beans, or chocolate.
1. Cut solid ingredients into small pieces, as needed.
NOTE: Hard vegetables, such as raw carrots, may require splitting and/or
quartering for proper product operation.
2. Turn the Cover counterclockwise and remove it from the Bowl.
3. Place up to 1½ cups of solid or ¾ cup of liquid ingredients into the Bowl.
CAUTION: To prevent product/property damage, do not overfill the Bowl.
4. Reattach the Cover securely onto the Bowl by aligning the arrow on the Cover
with the arrow on the Base.
NOTE: The product will not operate until the Cover is securely locked into
place.
5. Plug the product into a standard 110-120 volt AC electrical outlet, and then
press and hold the On/Pulse Button.
6. When the contents are at the desired consistency, release the On/Pulse Button,
and then allow the Blades to stop completely.
7. Unplug the product from the electrical outlet and then remove the Cover.
WARNING: Always unplug the product when it is not in use or is left
unattended.
8. Turn the Bowl counterclockwise to release the tabs on the edges of the Bowl
from the tabs on the Base.
9. Remove the Blade Assembly before pouring contents from the Bowl.
To Next Page
Loading...
