ASSEMBLING YOUR FOOD PROCESSOR
Before assembling your food processor, wash all parts, except the motor base in
warm, soapy water, rinse thoroughly and dry. To prolong the life of your appliance,
do not wash parts in the dishwasher.
Locking Mechanism Tab
Food Pusher
Food Pusher
Insert
Feed Tube
Thick Slicing
& Shredding
Disc
Processor Lid
French Fry &
Julienne Disc
Thin Slicing &
Shredding Disc
Rasping Disc
Processing
Bowl
Chopping
Blade
(stainless steel)
Beater
Attachment
Mixing/Dough
Blade (plastic)
Disc/Blade
Support
Controls
Beater(s)
Shaft
Motor Base
CAUTION: Unplug the appliance from the electrical outlet before assembling,
removing parts, or cleaning. Never place motor base or cord in water or other
liquids.
4
Note: The processing bowl must be locked onto the motor base and the processor
lid must be locked onto the processing bowl for the appliance to operate. The blue
LED light ring will illuminate when the appliance is plugged in and parts are properly
locked into position.
To Next Page
Loading...
Need help?
General