EasyManua.ls Logo

Chentronics Motivator3 - Page 4

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and Operation Manual
MNL-MOTIVATOR3REVA Page 4 of 9
REVISION DATE: 2021-DEC-15 DCO # 13824
Safety Symbols used in this manual comply with ISO 3864.
THESE SYMBOLS ARE USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY HAZARDS.
OBEY ALL SAFETY MESSAGES THAT FOLLOW THESE SYMBOLS TO AVOID POSSIBLE INJURY OR DEATH.
Indicates a hazard with a high level of risk which, if not
avoided will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided will result in minor or moderate injury.
HAZARDOUS VOLTAGE
The equipment contains a High Energy Ignition System which contains DANGEROUS AND
POTENTIALLY LETHAL VOLTAGE. To avoid risk of serious injury from electric shock, always
follow the safety precautions listed below:
Do not join or separate any connection to the equipment when the equipment is
energized.
Do not apply power to the equipment without an igniter attached or the igniter port
appropriately capped.
Keep the igniter firing end away from all personnel and flammable material.
The equipment must be operated by qualified personnel in accordance with applicable
local and national codes, standards, and ordinances.
The equipment is not field-repairable. Do not attempt to disassemble or repair the
equipment.