Warming/Reheating/Defrosting
For warming, insert water as shown in table below into the reservoir. Ensure
only the correct amount of water is in the reservoir. Use the timing guide below
to warm a baby bottle to around 38 degrees.
1/ Unscrew the water tank lid
2/ Fill the water tank using the opening as called for in the cooking guide below
3/ Screw down the water tank lid so that the colored oval on the plug lines up
with the mark on top of the steamer/blender.
4/ Swivel the lid clockwise and lift to remove.
5/ Put the feeding bottle to the steaming basket A. Fix lid.
If you wish to warm, reheating or defrosting big feeding bottles
6/ Fix the steaming basket D without the magic board on the base.
7/ Press button, the light comes on. Select warming function, Then
press to start.
The max warming time is 30 mins; And the default setting is 3mins; Also you can
press the “increase” and “decrease”button to choose the time you prefer.
8/ When warming is completed, the appliance beeps and the light goes off.
To Next Page
Loading...