Sterilising
1/ Unscrew the water tank lid
2/ Fill the water tank using the opening as called for in the cooking guide below
3/ Screw down the water tank lid so that the colored oval on the plug lines up
with the mark on top of the steamer/blender.
4/ Swivel the lid clockwise and lift to remove.
5/ Put the steaming basket D without the magic board.
6/ Press button. Select sterilizing function. Then press to start.
The max sterilizing time is 30 mins; And the default setting is 6 mins; Also you
can press the “increase” and “decrease”button to choose the time you prefer.
For one bottle 6 minutes is sufficient providing there is only 100ml of water in the
reservoir.
7/ When sterilization is completed, the appliance beeps and the light goes off.
To Next Page
Loading...