To Next PageTo Next Page
Need help?Do you have a question about the CHERUBINI MISTRAL A520012 and is the answer not in the manual?
Detects wind stresses and excessive weight, ensuring awning protection.
24-month guarantee, with repair/replacement at discretion. Product meets safety directives.
Details compatible Skipper Senso, LCD, Plus, and Wall remote controls.
Explains symbols for short, long, and double short motor rotations.
Lists technical details: power, dimensions, weight, IP rating, frequency, RF power, and operating range.
Demonstrates correct command sequences and illustrates invalid ones requiring repetition.
Covers sensor housing, base attachment methods, and optimal positioning for installation.
Steps for associating the sensor with a motor using a remote and the SET button.
How to verify correct memorization by briefly pressing the SET button.
Setting the sensitivity to vibrations using the rotating selector from 1 to 9.
Configuration of the function to detect awning inclination caused by water or snow.
Setting the selector and activating the sensor with the SET button for 4 seconds.
Procedure to check and toggle the Static Load function's active state via LED.
Steps to modify the memorized angle of inclination by deactivating and reactivating the function.
Procedures for activating the sensor with or without the Static Load function enabled.
Sensor operates in test mode for 3 minutes for verification of wind and static load alarms.
Procedure to test wind sensitivity by applying vibrations and observing awning closure.
Procedure to test load sensitivity by applying weight and observing awning closure.
Ensuring the sensor does not trigger alarms during normal awning movement.
Resolving issues where the awning stops and closes again during tests.
Explains automatic reopening after wind alarms and provides instructions for activation, deactivation, and deletion.
Procedure to safely deactivate the MISTRAL sensor before performing maintenance.
Importance of disabling the sensor before performing maintenance or changing batteries.
Steps for changing batteries, including automatic deactivation and reactivation.
Remedies for unexpected awning closure due to low batteries or radio communication problems.
Solutions for when the motor does not confirm activation after shell installation.
Steps to resolve issues with the Static Load angle learning procedure.
General| Brand | CHERUBINI |
|---|---|
| Model | MISTRAL A520012 |
| Category | Accessories |
| Language | English |
