Instruments and Controls
- 69 -
High beam switch
After the headlight for high beams
comes on, move the lever towards the
dashboard direction if you want to turn
the headlight for high beam on. At the
same time, headlight for high beam
indicator light will be on.
Recover the lever to its original
position; the headlight for low beam
will come on.
！Notice
At that time, the light switch should be
always in ― ‖position.
Meeting lamp switch
Move the operating lever towards the
steering wheel. Let the high beam
headlight come on, then release the
lever. After releasing, the level will
return to its normal position. The high
beam headlight is still on, if you have
not released the lever yet.
Be sure to comply with relevant traffic
regulations, while you use the
above-mentioned turn signal light and
illumination equipments.
Windshield wiper switch
To Next Page
