Training Center of After-Sales Department Chery International
6. Anti-theft alarm and locking system
122
3. Function description
Door locking system (for vehicle without PEPS, MT standard/comfort):
(1) Door locking control by remote controller:
At IGN-OFF, with 4 doors closed, if BCM receives lock order from remote controller, BCM
will lock the door; press the lock button again, and it will lock the door again. At IGN-ACC
or ON, press the lock button on remote controller, and BCM will not work.
At IGN-OFF, if any door is opened, BCM will receive RKE lock signal and lock central
control; 500ms later, the central control will be unlocked.
(2) Door lock control by central control switch
With 4 doors closed, if BCM receives central control lock order, BCM will lock doors.
Press the lock button on the central control, and BCM will execute locking action.
If any door is open and BCM receives the central control lock order, four doors will not be
locked. Press the unlock button on central control, and doors will be unlocked.
To Next Page
Loading...
