Training Center of After-Sales Department Chery International
6. Anti-theft alarm and locking system
123
3. Function description
Door locking system (for vehicle without PEPS, MT standard/comfort):
(3) Central control unlocking by FL door inner handle:
With 4 doors locked (not armed), pull inner handle of FL door, central control will be
unlocked.
(4) Automatic unlocking:
At 0 speed, with door locked, if ignition key is turned to OFF, BCM will unlock central control.
(5) Crash unlocking function:
With the key at ON, if BCM receives the signal “Crash Output Sts ≠ 00”, BCM will unlock the
central control, and 1s later, unlock it again; in this condition, locking is disabled till the key is
turned from ON to OFF.
To Next Page
Loading...
