Training Center of After-Sales Department Chery International
12. Instrument cluster
195
2. Function description
BCM
The key is turned to any
position other than ON;
FOLLOW
ME HOME
will be
activated
again
within its
valid time.
1. If instrument LCD screen and
backlight are not turned off;
“FOLLOW ME HOME x s” will be
indicated on LCD screen. “x” is the
remaining time of FOLLOW ME
HOME before this activation, +30s,
and after a 20s count-down, LCD
screen and backlight will be turned
off.
2. If the instrument LCD screen and
backlight are turned off; LCD will be
lit again, and “FOLLOW ME HOME
x s” will be indicated on LCD screen.
“x” is the remaining time of
FOLLOW ME HOME before this
activation, +30s, and after a 20s
count-down, LCD screen and
backlight will be turned off.
From HighBeamSts=0 to
HighBeamSts=1;
Low Beam Sts=1
Activation of FOLLOW ME HOME
– 2. When signals detected by the instrument cluster meet following conditions
To Next Page
Loading...
