Training Center of After-Sales Department Chery International
12. Instrument cluster
196
2. Function description
Trip mileage and total mileage
– Refreshing time
• The trip mileage on LCD screen will be refreshed every 0.1km traveled, with the
calculation cycle of 1s.
• The total mileage on LCD screen will be refreshed every km traveled, with the calculation
cycle of 1s.
– Display range
• Range of trip mileage: 0.0~999.9km; in excess of 999.9 km, the mileage will be zeroed.
• Range of total mileage: 0-999999 km; in excess of 999999km, this value will maintain
unchanged.
– Zeroing method
• Trip mileage 1
– Press and hold SET in the trip computer 1 mode;
– Maintain at D2/D3 for more than 2h (D2/D3 power mode IGN OFF mode)
– In D4 mode, the trip mileage will not be stored.
• Trip mileage 2
– Press and hold SET in the trip computer 2 mode
To Next Page
Loading...
