Training Center of After-Sales Department Chery International
2. PEPS system
46
5. Notices in operation and maintenance
Notice:
1. To apply “Add old key”, all the keys should do the match one by one, otherwise, other
matched key will not work.
2. No matter “Add new key” or “Add old key”, only one key can be kept in the cab, and the
key must be put on the key icon in the cup holder.
Operation procedure of “Add old key” :
1. Read the VIN by scanner from ECU, and apply the PIN from CHERY.
2. Enter the matching interface, select “delete all keys” menu.
3. Put the key in cup holder which marked with key icon, enter the match program interface,
select “Add old key” menu, input PIN, and the diagnostic apparatus will automatically execute
“Add old key” procedure.
4. After “Add old key” procedure is finished, press the unlock button and check whether the left
and right turning lamps on the instrument cluster are flashing or not. If flashing, the new key is
matched successfully, otherwise, the matching is failure.
To Next Page
Loading...
