Training Center of After-Sales Department Chery International
2. PEPS system
47
5. Notices in operation and maintenance
Operation procedure of replace ECU
1. Read the VIN by scanner from ECU, PEPS module, TCU, and apply the PIN from CHERY.
2. After the new ECU is successfully installed, press ignition (IG) switch to supply power.
3. Enter the matching interface, select ”Program EMS” menu, and input the VIN and PIN as
scanner interface reminding. After successfully program EMS, the scanner screen
shows ”Program EMS succeed”.
4. Depress the brake pedal (CVT car), and press the ignition switch to start engine. If yes, the
matching operation is successful, otherwise, it is failed.
To Next Page
Loading...
