Training Center of After-Sales Department Chery International
4. BCM
67
3. Function description
9
Follow Me
Home
Working pre-conditions:
①
Within 2 minutes after the key is turned to OFF;
②
The Flash switch is activated shortly.
Activation: Parking lamp and low beam lamp are lit by BCM, the indicator
lamp on instrument cluster will be lit.
Within 2 minutes after the key is turned to OFF, each operate Flash switch,
Follow Me Home will be activated for 30s, and this function can be
activated for 8 times at most(240s).
When Follow Me Home is activated, if its working time reaches, it will off
automatically.
When Follow Me Home is activated, long press Flash switch(>3s), low
beam lamp and parking lamp will be off and the function will be quit.
When Follow Me Home is activated, turn IGN SW to ACC/ON, and Follow
Me Home will stop.
With the key at OFF, within 2 minutes after Follow Me Home is activated, if
the time still not exceed 2 minutes since turn off Follow Me Home function,
Follow Me Home can be still activated.
To Next Page
Loading...
