Training Center of After-Sales Department Chery International
6. Anti-theft alarm and locking system
99
Receiving function of remote controller
Receiving functions of remote controller: (for MT standard and MT comfort)
–The frequency of 433.92MHZ is adopted. The remote control locking function is valid
with the key at OFF, and invalid with the key at other positions.
–The remote control unlocking function is valid with the key at any position. Each time
the button is pressed, the remote controller will transmit a 3-frame signal.
Receiving lock/unlock signals of PEPS: (for CVT comfort, CVT luxury and MT luxury)
–PEPS (passive entry + passive start function) is equipped in CVT comfort and CVT
luxury cars, and the receiving functions of the remote control are integrated on the PEPS
module. BCM communicates with PEPS module by CAN to lock/unlock the car and set
anti-theft mode.
1. General introduction
To Next Page
Loading...
