Need help?Do you have a question about the CHESTER 920 and is the answer not in the manual?
Provides essential safety instructions for operating machine tools, covering general precautions and best practices.
Emphasizes the critical need for wearing safety glasses during lathe operation to prevent eye injuries from flying debris.
Details safety precautions specific to lathe operations, including interaction with moving parts and tool handling.
Identifies and describes the purpose of each control lever, switch, and handwheel on the lathe.
Explains the correct procedure and height alignment for setting the turning tool relative to the workpiece.
Guides on adjusting main spindle bearings to eliminate end play without over-preloading.
Explains how to adjust gib strips on cross and top slides for smooth, play-free movement.
Details the procedure for adjusting feed screw end float on the saddle slides.
Describes how to adjust the top slide spindle to eliminate backlash.
Guides on adjusting the half-nut guides for smooth, play-free operation.
Explains how to adjust the leadscrew to eliminate backlash via the grub screw.
Lists all lubrication points requiring daily attention, specifying oil or grease.
To Next Page
General