Press and release the RPT button until REPEAT OFF
displays, to turn off repeated play.
4 (Information): Press to display the artist name and
album contained in the ID3 tag.
XM Radio Messages
XL (Explicit Language Channels): These channels,
or any others, can be blocked at a customer’s request,
by calling 1-800-852-XMXM (9696).
Updating: The encryption code in the receiver is
being updated, and no action is required. This process
should take no longer than 30 seconds.
No Signal: The system is functioning correctly, but
the vehicle is in a location that is blocking the XM™
signal. When you move into an open area, the signal
should return.
Loading XM: The audio system is acquiring and
processing audio and text data. No action is needed.
This message should disappear shortly.
CH Off Air: This channel is not currently in service.
Tune to another channel.
CH Unavail: This previously assigned channel is no
longer assigned. Tune to another station. If this station
was one of the presets, choose another station for
that preset button.
No Info: No artist, song title, category, or text
information is available at this time on this channel.
The system is working properly.
Not Found: There are no channels available for the
selected category. The system is working properly.
XM Locked: The XM™ receiver in the vehicle
may have previously been in another vehicle.
For security purposes, XM™ receivers cannot be
swapped between vehicles. If this message is received
after having your vehicle serviced, check with your
dealer/retailer.
Radio ID: If tuned to channel 0, this message will
alternate with the XM™ Radio eight digit radio ID label.
This label is needed to activate the service.
Unknown: If this message is received when tuned to
channel 0, there may be a receiver fault. Consult
with your dealer/retailer.
Chk XMRcvr: If this message does not clear within a
short period of time, your receiver may have a fault.
Consult with your dealer/retailer.
3-101
To Next Page
Loading...
