Removing the Spare Tire and Tools
The tools needed to remove the spare tire are located
in the storage compartment at the rear of the vehicle, on
the passenger’s side.
To remove the tools:
1. Open the liftgate. See Liftgate on page 2-22 for
more information.
2. Remove the convenience net, if the vehicle has one.
3. Open the jack storage compartment by lifting the
tab and pulling the cover off.
A. Jack
B. Strap
C. Bracket
D. Wing Nut
E. Bag and Tools
4. Remove the jack (A) and jacking tools (E) by
loosening and then removing the wing nut (D)
and bracket (C).
5-74
To Next Page
Loading...
