Chevrolet Fleetmaster Series 1947 User Manual

The S.A.E. 90 viscosity grade is recommended for "year-
around service ." However, when extr e mely low temperatures are
encountered for protracted periods during the winter months , the
S.A.E. 80 viscosity grade may be used.
"All-Purpose" Gear Lubricant-
Gear lubricants that will satisfactorily lubricate both passenger
car and truck hypoid rear axles, have been developed. These
lubricants are known as "All-Purpose" Gear Lubricants.
"All-Purpose" Gear Lubricants may also be used in passenger
car and truck transmission, steering gears, and in universal joints
requiring a fluid lubricant.
" All-Purpose" Gear Lubricants must be manufactured under
carefully controlled conditions and the Lubricant Manufacturer
must be responsible for the satisfactory performance of his
product. His reputation is your best indication of quality.
Lubricant Additions- The lubricant
level in the housing should be checked periodically.
It is recommended that any additions, required to bring up
the lubricant level, qe made using the same type of lubricant as
in the housing .
Lubricant Changes-While seasonal
changes of the lubricant are not required, it is recommended that
you have the housing drained and refilled with the recommended
lubricant at least twice a year, or every 6,000 to 10,000 miles.
CAUTION, Use a light flu~ing oil to flu~ out the hausings when drain-
ing. Do not use water, steam, kerosene, gasoline, alcohol, etc.
UNIVERSAL JOINT
The universal joint receives its lubrication from the
transmission.
STEERING GEAR
The steering gear is filled at the factory with an all-season gear
lubricant. Seasonal change of this lubricant is unnecessary and
fifty-three

Chevrolet Fleetmaster Series 1947 Specifications

General

Brand	Chevrolet
Model	Fleetmaster Series 1947
Category	Automobile
Language	English