yellowblue
1-8
To raise the seatback:
If you have a two
-door model, make sure the rear safety
belts are hooked behind the safety belt hangers. If you
have a four-door model, make sure the loops on the
seatback are fastened and the rear safety belts pass
through the loops.
1. Lift the seatback up and push it back to lock it
into place.
2. Be sure both sides of the seatback are latched. Push
and pull the top of the seatback to be sure it is locked
into position.
3. If you have a two
-door model, unhook the safety
belts from the belt hangers.
Safety Belts: They’re for Everyone
This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.
And it explains the air bag system.
CAUTION:
Don’t let anyone ride where he or she can’t wear
a safety belt properly. If you are in a crash and
you’re not wearing a safety belt, your injuries
can be much worse. You can hit things inside the
vehicle or be ejected from it. You can be seriously
injured or killed. In the same crash, you might
not be if you are buckled up. Always fasten your
safety belt, and check that your passengers’ belts
are fastened properly too.
To Next Page
Loading...
Need help?
General
